U.S. Army Corps of Engineers Interdisciplinary (Geospatial Data Manager) in Tulsa, Oklahoma
About the Position: This is an Interdisciplinary (Geospatial Data Manager), GS-XXXX-12 position for the U.S. Army Corps of Engineers Tulsa District and located in Tulsa, OK. For more information on USACE Tulsa District please click here
Oversee geospatial system architecture including acquiring, configuring, and maintaining system components (hardware/software) used for data management.
Analyze, design, develop, test, implement, and maintain geospatial databases.
Provide technical guidance on emerging software technologies used for GIS and geospatial data management.
Oversee the installation, implementation, and monitoring of geospatial software license applications and usage.
Maintain existing systems by troubleshooting, problem solving, upgrading, or debugging.
Implement procedures to ensure geospatial data integrity, quality, and compliance with standards.
Provide technical support to employees who request guidance on managing geospatial data.
Maintain liaison with manufacturers, professional organizations, and counterparts regarding available hardware/software products and new technologies and techniques.
Conditions of Employment
Who May Apply: US Citizens In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document. Basic Requirement for an Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. Basic Requirement for a Physical Scientist:
A. Degree: Bachelor's degree (or higher degree) in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.
B. Combination of Education and Experience: Courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education. Basic Requirement for Geographer:
A. Degree: Bachelor's degree (or higher degree) in geography; or related physical or social science such as geology, meteorology, economics, statistics, sociology, anthropology, political science, history, cartography, computer science, urban studies, or planning that included at least 24 semester hours in geography or related fields.
B. Combination of Education and Experience: Courses equivalent to a major in geography, or a related field that included at least 24 semester hours in geography or related fields, as shown in A above, plus appropriate experience or additional education. Basic Requirement for Land Surveyor:
A. Degree: Bachelor's degree (or higher degree) in land surveying; or civil engineering with a surveying option/emphasis. The civil engineering major must have included at least 6 semester hours of surveying, 3 semester hours of land law, and 21 additional semester hours in any combination of the following: surveying, photogrammetry, geodetic surveying, geodesy, route surveying, remote sensing, cartography, survey astronomy, land information systems, computer-aided mapping, aerial photo interpretation, and survey analysis and adjustments.
B. Combination of Education and Experience: Courses equivalent to a major in land surveying or civil engineering, as described in paragraph A, plus appropriate experience or additional education.
C. Registration: The basic requirements for this series may be fully satisfied by a current registration as a land surveyor in a State, territory, or the District of Columbia obtained by written examination. Such registration must have been obtained under conditions outlined in the National Council of Engineering Examiners (NCEE) Unified Model Law for Registration of Surveyors. Applicants wishing to be considered under this provision must show evidence of registration based on successful completion of the written examinations. Registrations granted prior to adoption of a registration law with qualification requirements equivalent to the NCEE Model Law by the State, territory, or District of Columbia are not acceptable under this option. To be considered equivalent to the NCEE Model law, registration laws must include the four options listed within the NCEE Unified Model Law in the section specifying "General Requirements for Registration" as a Professional Land Surveyor. Basic Requirement for Computer Scientist:
Degree: Bachelor's degree (or higher degree) in computer science or bachelor's degree (or higher degree) with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized Experience: One year of specialized experience which includes 2 out of 4 of the following: 1) Performing database management or programming; OR 2) Utilizing geospatial software to perform modeling, spatial analysis, or data management; OR 3) Managing geospatial software license applications or usage; OR 4) Maintaining computer systems including troubleshooting, problem solving, upgrading, or debugging. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11). Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted. You will be evaluated on the basis of your level of competency in the following areas:
Oral CommunicationSystems IntegrationTechnology Application FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html
A recruitment incentive of up to 6.5% of the base annual salary, not to exceed $5,000, may be offered to the selectee of this position. Total amount of payment is at management's discretion. Selectee must sign a two-year period of service (POS) agreement before assignment to the new position. Employee must agree to complete the two year POS agreement in new position. If employee wishes to terminate their POS agreement recoupment procedures will be initiated. Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration. You will be required to provide proof of U.S. Citizenship. Two year trial/probationary period may be required. Direct Deposit of Pay is required. Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees. If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet. This is a Career Program (CP) 18 - Engineers and Scientists position. You may claim military spouse preference (MSP). Multiple positions may be filled from this announcement. Salary includes applicable locality pay or Local Market Supplement. Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website. When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information. If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application. Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulations.