Job Information
BAE Systems Pipefitter Improver in San Diego, California
Job Description
A pipefitter Improver is responsible for removing, repairing, targeting, laying out, fabricating, installing, and testing marine piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. in accordance with work item specifications, NAVSEA/Military standards and drawings or other regulatory body standards such as ABS, Military Sealift Command, etc. Repair and fabrication include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment. Additional tasks associated with this position include blanking and pressure testing of tanks (structural boundary testing). An Improver is also responsible for providing direction to helpers as directed by the supervisor. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE
Must be able to comprehend instructions and general correspondence.
Must have a working knowledge of ship repair terminology and ship compartment naming convention.
Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.)
Must be able to effectively confer job related information verbally and in writing including providing recommended corrective action.
Must have working knowledge of different types of joint fit-ups.
Must have a working knowledge of Silver Brazing theory.
Must be able to certify in:
a. MT Braze (B-1)
Must be able to interpret specifications and Navy/MSC/ABS standard items and manuals.
Must possess a working knowledge of equipment and work processes used in marine pipe fabrication, repair, and targeting.
Must be able to operate and care for equipment, portable power tools, and hand tools used to accomplish assigned work.
Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems.
Must have four (4) years of pipefitting experience, two (2) of which in the maritime repair environment.
Required Education, Experience, & Skills
DUTIES AND RESPONSIBILITIES
Provide direction to a pipefitter Helper if assigned.
Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor.
Work shifts and overtime as assigned.
Be accountable for completion of daily work assignments.
Comply with OSHA standards and BAE best safety practices.
Keep your work area clean and safe at all times, especially at the end of the shift.
Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary.
Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor.
Comply with the Company s Non-Discrimination and Anti-Harassment Policy which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment.
Confer with the supervisor and Journeyman to resolve unexpected events related to your assigned task. Carry out written or oral instructions.
Work Tasks Include:
a. Inspect and prepare the area for work, taking special care if hot work is required. Verify gas free certifications and tag-outs, before commencing any work.
b. Run lines and leads required to accomplish work. Accomplish drop test if using flammable or oxygen depleting gases.
c. Inspect work for defects before turning the job over to welders. Correct fit-ups as required. Confer with supervision or journeyman before correcting deficiencies.
d. Document existing conditions before commencing work and report conditions to the journeyman or supervisor.
e. Remove damaged pipe in accordance with specifications and as directed by the journeyman or supervisor.
f. Measure or template pipe for fabrication.
g. Blank systems in accordance with standard Item 009-24 or other applicable safety standards.
h. Fit up new pipe using the proper fit up type in accordance with specifications.
i. Ensure a strain free fit-up to pumps or other connecting equipment.
j. Blank tanks and accomplish boundary air tests.
k. Accomplish or verify Lock-out Tag-out requirements before commencing.
Preferred Education, Experience, & Skills
PHYSICAL DEMANDS:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites.
While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear.
The employee is occasionally required to sit.
SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements.
Lift/push/pull 50 lbs to 75 lbs on an occasional basis (0-25% of the day).
Lift/push/pull up to 20 lbs on a frequent basis (25-75% of the day).
Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel.
Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps).
Work at a variety of levels and positions (ex. Waist, eye, above head).
Good balance while working on uneven surfaces and maneuvering obstacles.
Sufficient handgrip and coordination to carry and operate tools and equipment.
Access work areas through 18 x 36 openings and work in confined spaces for prolonged periods of time (33-66% of the day).
Respond to visual, verbal, and audible sounds/commands.
Work at heights above 12 from ladders, scaffolding, and manlifts.
Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.
Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis.
Pay Information
Full-Time Salary Range: $49358 - $54413
Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience.
Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20 hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics.
Pipefitter Improver
105374BR
EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression