Job Information
PSEG Relay Technician in Roslyn, New York
Requisition : 80806
PSEG Company: PSEG Long Island
Salary Range : $ 42.73 - $ 59.96
Incentive : Not applicable
Work Location Category : Onsite
PSEG operates under a Flexible Work Model where flexible work is offered when job requirements allow. In support of this model, roles have been categorized into one of four work location categories: onsite roles, hybrid roles that are a blend of onsite and remote work, remote local roles that are primarily home-based but require some level of purpose-driven in-person interaction and living within a commutable distance, and remote non-local roles that can be effectively performed remotely with the ability to work in approved states.
PSEG offers a unique experience to our more than 12,000 employees – we provide the resources and opportunities for career development that come with being a Fortune 500 company, as well as the attention, camaraderie and care for one another you might typically associate with a small business. Our focus on combatting climate change through clean energy technology, our new net zero climate vision for 2030 and enhanced commitment to diversity, equity and inclusion; and supporting the communities we serve make this a particularly exciting time to join PSEG.
Union Local
IBEW 1049
Summary
Job Duties:
This classification covers employees engaged in performing the highest type of independent or cooperative work in the skills indicated below. Such employees must be thoroughly familiar with the Company's safety rules and the general rules for operation of PSEG Long Island's electric system as they apply to his work.
Having a thorough working knowledge of construction, operation and application of all electro-mechanical and solid state electronic relays, including carrier current, audio and r.f. frequency transfer tripping equipment, and the theory of their operation.
Having a good working knowledge of all types of supervisory control and data acquisition (SCADA) systems, load control, metering and telemetering systems involving digital and/or analog principles, techniques and solid-state discrete and integrated circuits.
Having a good working knowledge of high-speed (4800 bits per sec) digital data transmission principles and servicing techniques on all types of communications channels.
Having a thorough working knowledge of phase and vector relations for current and voltage and the application of this information in analyzing and interpreting phase angle readings obtained at all types of relays and instruments.
Calculate single phase and three phase KW, KVAR, KVA and power factors given system voltage, current and phase angle readings.
Job Duties & Responsibilities
Duties cont'd:
Lay out and carry through jobs of the quality described below:
Read and interpret complicated plans, drawings and specifications.
Must have the ability to diagnose and correct difficulties and faults.
Must be capable of preparing written reports and sketches.
Instruct and train lower grade personnel in working methods and safe work practices.
Working alone or with others, performs the following under the general supervision of relay engineers or supervisors:
Applying manufacturers' instructions for testing, adjusting and maintaining equipment within his classification.
Reading and analyzing prints, analyzing and interpreting test results, installing, inspecting, testing, adjusting, maintaining, repairing, checking and correcting wiring, and investigating questionable operations, of all types of relays, instrument transformers, metering equipment, and telemetering equipment, load Control equipment, supervisory control and data acquisition (SCADA) equipment, and oscillographic equipment with their associated wiring and auxiliary devices.
Plan and coordinate work with other groups as required.
Must have the ability to diagnose and correct difficulties and faults, analyze and interpret test results, read and interpret schematic, functional, logic diagrams and wiring prints associated with all the equipment for which the Protection Division has responsibility.
Must be capable of preparing written reports and sketches.
Must be able to discriminate as to circuits and equipment required to be cleared in order to safely conduct the work and execute the necessary switching operations in acordance with a duly authorized switching order.
Having and using a thorough knowledge of the Company's Safety Rules and "General Rules for Operation of Electric Equipment and Lines".
Must be capable of working on energized equipment without causing interruptions to service.
Setting, testing, calibrating adjusting and repairing all types of protective relays.
Perform similar tests as above on all primary system reclosers. These reclosers may be equipped with mechanical, hydraulic, Pneumatic, electrical and electronic control mechanisms.
Perform all necessary system operational tests to insure proper functional performance of complete protection, control, telemetering, and supervisory control and data acquisition (SCADA) systems.
Perform minor capital installation work from sketches or instructions on protective or control circuits as required to expedite the correction of circuit design deficiencies or to quickly satisfy system control.
Years of Experience
Job Qualifications
Associates Degree from an accredited college in Electrical Technology or Electronics or honorable discharge with an ET (Electronics Technician rate) from the Military. Applicants will need to provide a copy of their degree and a copy of their official college/military transcript.
Possession of a valid US driver's license in good standing.
Must pass a written screening exam.
The successful candidate will be required to work overtime on an as needed basis and participate in the Emergency Restoration Program.
Education
Associate in Electric Technology
Licenses or Certifications
- Valid US driver's license
Training and Courses
- Relay Tech Exam.
PSEG is an equal opportunity employer, dedicated to a policy of non-discrimination in employment, including the hiring process, based on any legally protected characteristic. Legally protected characteristics include race, color, religion, national origin, sex, age, marital status, sexual orientation, disability or veteran status or any other characteristic protected by federal, state, or local law in locations where PSEG employs individuals.
As an employee of PSEG you should be aware that during storm restoration efforts, you may be required to perform functions outside of your routine duties and on a schedule that may be different from normal operations.
For all roles, PSEG’s drug and alcohol testing program includes pre-employment testing, testing for cause, and post-incident/accident testing. For employees in federally regulated roles (including positions covered by USDOT, PHMSA, or NRC regulations), this also includes random testing. Although numerous states throughout the country have legalized marijuana/cannabis products recreationally and/or medically, it is prohibited for employees in federally regulated roles. Employees who are hired or transfer into a federally regulated role are subject to drug and alcohol testing, inclusive of marijuana. Please note that the use of CBD products may result in a positive drug test for THC/Marijuana and such use is not a legitimate medical explanation for such a positive result.
PSEG employees must apply for jobs internally through emPower which can be accessed through sharepoint.pseg.com (https://sharepoint.pseg.com/Pages/Home.aspx) by clicking on the emPower icon, then selecting careers. This site is strictly for candidates who are not currently PSEG employees, with the exception of PSEG employees who do not have company email addresses.
PSEG is committed to providing reasonable accommodations to individuals with disabilities. If you have a disability and need assistance applying for a position, please call 973-430-3845 or email accommodations@pseg.com.
If you need to request a reasonable accommodation to perform the essential functions of the job, email accommodations@pseg.com . Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.
ADDITIONAL EEO/AA INFORMATION (Click link below)
Know your Rights: Workplace Discrimination is Illegal (https://www.eeoc.gov/sites/default/files/2022-10/22-088_EEOC_KnowYourRights_10_20.pdf)
Pay Transparency Nondiscrimination Provision
Diversity at PSEG: Equal Opportunity Employer
PSEG is an equal employment opportunity employer and makes employment decisions, including but not limited to, hiring, firing, promotion, demotion, training, and/or compensation, on the basis of merit. Employment decisions are based on an individual’s qualifications as they relate to the job under consideration. PSEG's policy prohibits unlawful discrimination based on sex (which includes pregnancy, childbirth, breastfeeding, or related medical conditions, the actual sex of the individual, or the gender identity or gender expression), race, color, religion, including religious dress practices and religious grooming practices, sexual orientation, national origin, ancestry, citizenship, marital status, familial status, age, physical disability, mental disability, medical condition, genetic information, protected veteran or military status, or any other consideration made unlawful by federal, state or local laws, ordinances, or regulations.
Need to request an accommodation?
If you have a disability and need assistance submitting your resume, applying for a position or registering for a test, please call 973-430-3845. Any information provided regarding a disability will be kept strictly confidential and will not be shared with anyone involved in making a hiring decision.
PSEG is committed to complying with all applicable laws providing equal employment opportunities. This commitment applies to all persons involved in the operations of the Company and prohibits unlawful discrimination by any employee of the Company, including supervisors and co-workers.