Campus Pride Jobs

Summary THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a Painter, Position Description Number D2127000 and is part of the CSMS - South in Fort Stewart, Georgia. This is a full-time, Excepted Permanent, dual status position which requires Georgia Army National Guard Membership. Area of Consideration: Current members of the Georgia Army National Guard. Responsibilities As a Painter, WG-4102-09 you will: Prepare surfaces (i.e., metal, wood and glass) by removing rust, paint, and loose particles. Fills in holes and dents using body fillers and hardeners. Sands and evens out dents and scars to assure a smooth and level surface using sanders, scrapers, sandpaper, hand tools, wire brushes, and paint remover. Applies coatings to specified areas ensuring the surfaces are free from skips, runs, and drips. Applies rustproof compound to areas such as splash panels, quarter panels, seams structural members, and underbody construction. Applies coatings using brushes, rollers, and spray paint equipment. Prepare coating materials using guidelines set by the manufacturer, by tinting, toning, etching, blending, and mixing in various additives (i.e., retardants, hardeners, drying agents, and other additives) needed for the different coatings to work properly and achieve the necessary surface appearance. Uses measuring equipment (i.e., Zhan cup) to achieve the proper viscosity and thickness for applying the coatings. Applies prime, intermediate and final coats of semi-gloss, gloss and other paint, lacquer, enamel, varnish and shellac. Ensures that match, texture and appearance meet finish requirements. Replaces and applies markings/lettering as specified by appropriate manuals. Apply coatings using acceptable methods of the trade to include special finishing techniques to achieve desired results. Reads and interprets blueprints when applying camouflage patterns. Replaces markings and letterings as specified by the appropriate manuals. Reads and interprets directions that relate to mixture, use, and application of various kinds of coating materials, solvents, and precoating agents. Monitor and adjust air pressures in paint booth, controls heat settings and drying times in drying booth to achieve proper surface adhesion of coatings. Completes records for paint usage and paint waste as per environmental regulations. Apply Chemical Agent Reactive Coating (CARC) materials in accordance with specifications and dimensions. Manages workflow into the paint shop as assigned by the supervisor. Determines what jobs can be done in a series or if items need to be completed alone. Confers with the customer when needed to best achieve the desired results. Cleans and maintains painting equipment. Perform other duties as assigned. Requirements Conditions of Employment Qualifications Military Grades: E1-E7. Compatible Military Assignments: ECMF: 12,91,92. GENERAL EXPERIENCE: Experience or training which demonstrates the candidate's knowledge of surface preparation (removal of rust, dirt, paint, etc); coating methods (brushing, rolling, and spraying); and coating materials (paints, varnishes, shellacs, etc). Must have the ability to use tools and equipment associated with the painting trade and to read and interpret directions. SPECIALIZED EXPERIENCE: Experience or training which demonstrates the candidate's knowledge of any surface preparation and coating methods and techniques. Skill in building up, shaping, and leveling surfaces with metal and synthetic resins, plastics, and patching compounds; obtain finely smoothed surfaces with abrasive compounds, pumice, and rottenstone; even out dents and scars by burning-in processes; and treat surfaces with pre-coating agents. Physical Effort: Work is performed in tiring or uncomfortable positions for long periods. There is frequent standing, bending, reaching, stretching, climbing, and crouching; or working on top of, under, and in tight compartments or cramped or awkward positions. Performs strenuous work while standing, lying, or sitting. Frequently lifts and carries items, unassisted, weighing up to 40 pounds; and often exerts similar effort in pushing, pulling, and positioning parts, assemblies, and equipment. Frequently lifts and moves heavier items with the assistance of other workers or with lifting devices such as jacks, hoists, and cranes. May be required to work from ladders or work platforms at varying heights. Working Conditions: Work is performed both inside and outside. When inside, the incumbent is frequently exposed to drafts, changing temperatures, and noise which is difficult to talk above. When outside, the incumbent is exposed to bad weather, in mud or snow, and in wet or icy areas. The incumbent is frequently exposed to irritations or discomfort from dust, heat, fumes, and hard damp floors or ground. Typically works on parts and systems, which are dirty, oily, or greasy. Frequently exposed to the possibility of cuts, burns, bruises, and sprains while repairing, positioning, and moving equipment. Often exposed to the possibility of falls while repairing, positioning, and moving equipment; and skin irritations from acid, fluids, and lubricants. Uses safety equipment such as protective ear devices, hard hats, hard-toe shoes, respirators, and protective clothing, which may be uncomfortable to wear or use and may be worn or used for long periods. Education There is no education substitution for specialized experience for this position. Additional Information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).